14 Nov 09 Why Should I Choose Expanding Foam Insulation?

There are four insulation types’ to consider when choosing insulation they are; batt and blanket, rigid board, loose fill and Expanding foam insulation. I will talk about each individually so you will have a better understanding when choosing insulation.

When choosing insulation Batt and blanket should be considered. It’s is made from fiberglass and rock wool. It’s used in walls and ceilings of unfinished buildings. Contractors usually install between studs 16-24″ apart. It’s the cheapest, but without proper installation it will have a minimal effect. After installing you will need to vapor seal, house wrap or caulk.

Next we will consider rigid board when we are choosing insulation. It’s made from fiberglass, polyurethane or polystyrene. It’s used in basement walls cathedral ceilings, flat roofs and building perimeters. Rigid board is not moisture or flame resistant. Bugs often burrow in this insulation. This product required to be covered by fire resistant paneling or dry wall. I wouldn’t consider rigid board when choosing insulation.

The third is loose fill insulation. Like expanding foam insulation. This insulation is blown into unfinished walls attic and ceilings to make a blanket effect. It is made from cellulose or fiberglass. Loose fill is treated for moisture and fire resistance.

Loose fill made from fiberglass or cellulose like Expanding foam insulation it’s blown into the walls to make a blanket effect. It is used in unfinished attics and walls.

Expanding foam insulation has many benefits. It reduces wind washing, sound and condensation. It improves air leakage, air quality and lowers heating and cooling bills. It protects against floods and doesn’t deteriorate in time. It can be used in extreme temperatures effectively. You don’t need to winterize further. It can be applied over the old insulation material.

Expanding Foam insulation has more benefits. It can be used efficiently in hot or cold temperatures. It reduces noise, condensation, and wind washing. It also helps protect against flood and makes building more structural sound. It improves air quality and lowers utilities. It doesn’t shrink or deteriorate with age. It does not require further winterizing. You can apply Expanding Foam Insulation over old material.

There are 4 types of insulation all having jobs they are better suited for than others. Out of the bunch I would pick Expanding foam insulation when choosing insulation. It covers the area better, improves air quality and reduces bills. Expanding foam don’t weaken over time or require further maintenance and reduces noise.

AtticInsulationGuide.com is the Internet’s premier resource for attic conversion, with facts and articles on topics such as attic conversion, and much more. Click the links above for more information !

Tags: attic conversion, attic improvement, Attic insulation, attic ventilation, Family, foam insulation, heating, home improvement, house insulation, insulate the attic, insulation, roof insulation, roof padding, save energy, spray insulation

12 Jun 09 What are the Benefits of Expanding Foam Insulation?

There are four insulation types’ to consider when choosing insulation they are; batt and blanket, rigid board, loose fill and Expanding foam insulation. I will talk about each individually so you will have a better understanding when choosing insulation.

The first we will consider when choosing insulation is loose fill. This insulation is made from either cellulose or fiberglass. It makes a blanket effect when it is blown into the walls. Contractors use it attics and walls in unfinished buildings. This type is treated for fire resistance and moisture.

Next we will consider rigid board when we are choosing insulation. It’s made from fiberglass, polyurethane or polystyrene. It’s used in basement walls cathedral ceilings, flat roofs and building perimeters. Rigid board is not moisture or flame resistant. Bugs often burrow in this insulation. This product required to be covered by fire resistant paneling or dry wall. I wouldn’t consider rigid board when choosing insulation.

The third is loose fill insulation. Like expanding foam insulation. This insulation is blown into unfinished walls attic and ceilings to make a blanket effect. It is made from cellulose or fiberglass. Loose fill is treated for moisture and fire resistance.

The last is Expanding Foam insulation. This insulation is my favorite when choosing insulation. It is made from modified urethane or polyurethane. The product is blown into the walls, expanding while it dries to fit the entire area. Once dry, excess is cut off and a thermal barrier is applied according to regulations.

Expanding Foam insulation has many uses. They range from finished walls, ceilings, floors, docks and airplanes. It’s especially helpful around electrical boxes, outlets, window seals and other small tight enclosed areas.

Expanding Foam insulation has more benefits. It can be used efficiently in hot or cold temperatures. It reduces noise, condensation, and wind washing. It also helps protect against flood and makes building more structural sound. It improves air quality and lowers utilities. It doesn’t shrink or deteriorate with age. It does not require further winterizing. You can apply Expanding Foam Insulation over old material.

There are 4 types of insulation all having jobs they are better suited for than others. Out of the bunch I would pick Expanding foam insulation when choosing insulation. It covers the area better, improves air quality and reduces bills. Expanding foam don’t weaken over time or require further maintenance and reduces noise.

Tags: attic conversion, attic improvement, Attic insulation, attic ventilation, Family, foam insulation, heating, home improvement, house insulation, insulate the attic, insulation, roof insulation, roof padding, save energy, spray insulation

24 Apr 09 Tips For An Easy Attic Insulation Through Foam Insulation

When insulating your attic you have to think about what type of insulation you want to use, how much you need, how much it is going to cost and the most important, how good is the insulation and will it last? There are different types of insulation and most very easy to install.

If you want a long lasting and very effective insulation, foam insulation is one of the best, but it is harder to install and therefore it must be installed by a professional. Foam insulation is also a bit more expensive than the other methods because it offers the highest R value in insulation and is also the longest lasting method of insulation.

Foam insulation comes in two types. The first is open celled foam, foam that is less compressed and holds a lot of air bubbles, because of this it can be removed very simply removed. The second is closed cell foams, foam that is very dense and compressed and hardly holds any air at all, this foam is a lot harder and is higher in R value and can’t be removed easily.

Installing attic insulation is a very simple job that one person can complete in the space of a weekend if fitted in a proper manner. Start at one end of the attic, making sure you put weight onto open joists. Start placing the batts or unroll the insulation between the joists. Butt down the rolls making sure not to butt them very hard as not to damage the insulation, the same is done with the batts. Use the utility knife to cut away remaining fibers and any areas that touch electrical items as not to cause a fire.

It is recommended and necessary to take the necessary precautions when insulating an attic, even if you are only observing. Your body must be completely covered in a protective cloth, using a breathing mask and safety goggles to protect your eyes, as the foam can highly irritate your skin.

Tags: attic conversion, attic improvement, Attic insulation, attic ventilation, Family, foam insulation, heating, home improvement, house insulation, insulate the attic, insulation, roof insulation, roof padding, save energy, spray insulation